Reflective apertures, stops and shutters

Sometimes a high power infra red laser needs to have its power attenuated, or have strongly diverging modes removed from the beam. At Laser Beam Products we manufacture mirrors with precision through holes or with sharp knife edges that are very cost effective, even when made to your design as a one-off prototype.

We usually advise customers that the length of the hole is no more than the hole diameter, to avoid having a “tunnel” with an aperture at either end. We can make tapered holes to avoid this problem. Because our Gold coating is applied electrochemically the internal bore of any hole is also Gold coated.GoldPrismHoleFlippedIf an acousto-optic modulator (AOM) is being used, a reflective aperture can be used to manipulate one of the beam orders to be reflected and the other to be transmitted. We can make through holes as small as 1 mm diameter very accurately.

Stainless_Steel_Prism

 

 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s